1972 Chevelle SS Big Block Exhaust

The 1970 -72 Chevelle Model year dual exhaust systems consisted of 2 1/2″ head pipes and 2″ tail pipes. All of the big block cars from 1970 -1972 had a dome shaped resonator which ended at 2 1/2″ allowing for the chrome tip. Our reproducion exhaust kit comes 14 ga aluminized with correct 2 1/2″ head pipes with wrinkles and flats, correct extensions, donuts, flanges, mufflers, 2″ tail pipes with correct resonators welded on, correct GM style clamps, installation instructions, diagrams and sealant. Our exclusive reproducion hangers are available with this system, as well as correct GM heat riser and stainless steel stud kit with correct lock nuts. Ask about our concours show pkg. for those who like it just a little bit better than original, or our stamped mufflers to really impress the judges.

Ask about our turbo mufflers for a little extra roar!

1968 - 1972 GM A- Body Front Hanger

These hangers are correct for 1968-1972 GM A-Body Exhaust Systems.For the longest time the only hangers available were actually for the 1964 - 1967 GM A body's. Alltough th hangers look extemely similar and will work just fine That is not good enough for Gardner. The hangers you see here are identilcle reprodutions of the unique 1968 to 1972 GM A body hangers. They have been painstakenly reproduced from our originals and come zinc plated hand built with lthe correct corded rubbers and button head rivets, zinc plated retainers and correct screws. They come standard with our 1968-1972 GM A body concours exhaust systems and are a Gardner Exclusive reproduction.

1964 - 1972 GM A - Body Retainer

These retainers were used on the GM A - Body Muscle cars on the muffler hangers. The attaching screw first went through this reatiner and then through the rubber. The reatainer functioned as a washer to protect the rubber on the hanger. Our retainers have been reproduced from the orginal in the picture and come zinc plated. They are a Gardner EXhaust exclusive reproduction and come standard with our concours show pkg. or can be optioned for with one of our entire systems.

1970-72 Chevelle SS Driver SideTail Pipe Hangers

These hangers are a Gardner Exhaust Exclusive Reproduction. Original hangers accomplished two things, they not only hung the tail pipe, they clamped down on the chrome extensions as well. Our hangers are reproduced from original hangers come zinc plated, built with tire rubbers as original as well as our reproduction button head rivets. These hangers come with the correct built in J to hook over the top of the frame rail. As with all of our reproductions we encourage you to compare them to the original.

1970-72 Chevelle Passenger SideTail Pipe Hangers

1969 - 1972 Chevelle SS Tips

Although these tips are not one of our own reproductions they are an excellent copy of the Original tips did not have a part number, however, NOS tips do. These reproduction tips do not have any stampings and are as close to factory as possible. They are an option with our 69 -72 SS Chevelle Systems.

1957-1972 Chevy Extensions and Donut Gaskets

These are the correct Chevy extensions and donut gaskets that were used in the head pipes of every chevy from 1957 up until 1972. They come as part of any Gardner Exhaust Chevy Kit

1957-1972 Chevy Stud Kit

This is the correct stud kit for the 1957-1972 Chevys. This stud kit has the correct dog point on the studs and uses the correct stove nuts as original. This kit is available with any of our Chevy systems.

Sealant

Originally a clear silicon sealant was used in all the joint to joint connections on most exhaust systems. This was referred to as "grease" in the assembly manual but it was a clear sealant like the one pictured here. After analyzing original samples off our pipes and searching incessantly we came up with a match with the seaman pictured here. This sealant comes as part of any Gardner Exhaust Kit

GM Style Clamp

This is the correct style clamp used on the 1965-1972 Chevelles. They are available in multiple sizes and come either raw steel or zinc plated when our concours show pkg. is ordered.

1965-1971 Big Block Heat Riser

This is the correct big block heat riser for the 1965 - 1971 Big Block Chevys. They come with the correct chevy big block gasket and are available with any of our Chevy big block exhaust systems.